elite cr-53 miniature dc-26.5 ghz spdt switch failsafe sp ec ifi cation s dc-6 ghz 6-12 ghz 12-18 ghz 18-26.5ghz vswr (max) 1.25:1 1.40: 1 1. 50:1 1.80:1 inse rt ion loss (m in) 0.20 db 0.40 db 0.50 db 0.70 db isolation (max) 70.0 db 60.0 db 60.0 db 50.0 db ty pica l perfo rma nce 3000 800 400 200 80 40 10 )sttaw( wc rewop 0.1 1.0 4.0 10 18 26.5 frequency ghz standard sma connectors 15 25 ssol nruter 0.01 26.5 frequency ghz 0.01 26.5 frequency ghz 0.0 0.4 bd li bd noitalosi 90 80 70 60 specifications rf contacts: b reak bef ore make actuator v olt ag e (v dc) 20 o c 12 15 28 curren t (ma) 200 16 0 90 switching time: 20 msec max c onnectors: sma (f) weight: 1.65 oz. max t emperature range: -55 o c to +85 o c (operating) shock: mil-std-202 method 213, condition d (500g non operating) vibration: mil-std-202 method 214, condition d (10g rms non operating) humidity: mois ture seal a vailable typical contact life: 5 m illion cycles r f power handling the cr-53 swi tc h is a broadband, sp dt, elect romechanical, coaxial switc h designed to swi tc h a microwave signal from a common input to either of two outputs. the cr-53 series has a higher operting t emperature range than the commercial ccr-53 and higher frequency range than the elite cr-33 serie s. the characterist ic impedance is 50 ohms. the switches are small with conne ct or spacing compatible with sma c onne ct ors. the cr-53 series swi tc h is offered with either a failsafe or latc hing act uator. this design is compatible with the two most common mounting hole pat- tern s. the cr-53 series switc h is interc hangeable with a variety of switches. if your requirements are more demanding then please contact the factory. t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2007 insertion loss repeatability (1 million cycles): dc to 6 ghz: 0.05 db dc to 20 ghz: 0.1 db
elite cr-53 miniature dc-26.5 ghz spdt switch failsafe analog ttl indicators ser ies connectors actuator v olt age part numbering system for cr-53 (failsafe) cr-53 s 1 o - n opt ions act uat or t ype connector s: sma female actuator voltage 1: 28vdc failsafe 2: 15vdc failsafe 3: 12vdc failsafe actuator t ype o: no indicator contacts c: indicator contacts opt ions t: ttl drivers wi th diodes n: narrow body r: positive + common for other options cont act factory optional narrow width body standard width body h = 1.30 max. std model h = 1.80 max. ttl model h = 1.30 max. std model h = 1.80 max. ttl model t el: (800) 351-7368 www.teledynecoax.com email: coax@teledyne.com specifications subject to change without notice. 10/2007
|
